Accurizing

M700 REMINGTON ACCURACY TUNE UP (Basic)

Basic Tune Up for Remington M700P, LTR or Varmint Synthetic rifles with HS Precision stocks only.

(Short Action 1" Mount prices shown, Add $20.00 for Long Action or 30MM rings)

Ship your personal or department rifle to IBA. All rifles are given a thorough inspection (LTI) by our competent staff of Armorers. Serious problems, like excessive headspace, will be brought to your attention before dollars are spent on the upgrade. Standard turnaround time is 3-4 weeks.

Work Performed:

  • Perform "LTI" Inspect Headspace, Bore Erosion and all Trigger Parts
  • Chase all threads on the Receiver
  • Recrown Muzzle with diameter of Bore for more consistent shots
  • Polish Feed Ramp, fit Magazine Box
  • Clear Aluminum Bedding Block to allow proper Receiver / Bedding contact
  • Epoxy Sling Swivel Studs to prevent loosening
  • Re-paint Barrel Channel to help eliminate Oils and Solvents from penetrating the Stock
  • Disassemble, Clean and re-lubricate all trigger parts
  • Set Trigger Pull to 3 3/4 lb's, Set Sear Engagement and Overtravel and re-seal screws
  • Install HK 3/16 torque bolts. Torque set rifles provide shot to shot consistency
  • Install IBA One Piece Target Mount (20MOA of Built in Elevation)
  • Install/Re-install customer scope and boresight
  • Test Fire and rezero for 100 yards
  • Completely Clean and lube all moving parts 

IBA Customer - $425.00

M700 REMINGTON ACCURACY TUNE UP (Master)

Master Tune Up for Remington M700P, LTR or Varmint Synthetic rifles with HS Precision stocks or any McMillan stocked rifle. This does not include the actual build up required for a new McMillan stock. If you have any questions please email us at sales@ironbrigadearmory.com

Master Tune Up (Short Action prices shown, Add $45.00 for Long Action)
Includes all features of the Basic Tune Up (Shown Below) plus installation of the IBA Tactical Steel Trigger Guard and titanium barrel pad forward of the recoil lug. The Tactical trigger guard replaces the alloy sporter guard making the rifle more resistant to damage due to field combat/tactical conditions. It a lso assists in maintaining "Battle Sight Zero" [BZO] as it anchors the receiver firmly in the bedding. The titanium barrel pad positions the barreled action in the stock for consistent removal and re-installation without shifting the BZO. Note: Stock must be routed and bedding material (Titanium Devcon ) applied. The entire weapon is re- parkerized in dark gray for added durability.

Work Performed:

  • Perform "LTI" Inspect Headspace, Bore Erosion and all Trigger Parts
  • Chase all threads on the Receiver
  • Recrown Muzzle with diameter of Bore for more consistent shots
  • Polish Feed Ramp, fit Magazine Box
  • Clear Aluminum Bedding Block to allow proper Receiver / Bedding contact
  • Epoxy Sling Swivel Studs to prevent loosening
  • Re-paint Barrel Channel to help eliminate Oils and Solvents from penetrating the Stock
  • Disassemble, Clean and re-lubricate all trigger parts
  • Set Trigger Pull to 3 3/4 lb's, Set Sear Engagement and Overtravel and re-seal screws
  • Install HK 3/16 torque bolts. Torque set rifles provide shot to shot consistency
  • Install IBA One Piece Target Mount (20MOA of Built in Elevation)
  • Install/Re-install customer scope and boresight
  • Test Fire and rezero for 100 yards
  • Completely Clean and lube all moving parts 

IBA Customer - $1050.00

info@ironbrigadearmory.com

 
 

Copyright © IBA